Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.
To reset the camera to the factory default settings:
- Disconnect power from the product.
- Press and hold the control button and reconnect power.
- Keep the control button pressed for about 15 seconds until the status LED indicator flashes amber.
- Release the control button. The process is complete when the status LED indicator turns green.
The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90
It is also possible to reset parameters to factory default via the direct access of the camera. Go to Setup > System Options > Maintenance > Default
Comments
0 comments
Article is closed for comments.